Scotchcal Edge Sealer Scotchcal Edge Sealer- 4150S 3M9410
Scotchcal Edge Sealer- 4150S 237mL
Product Description
3M Edge Sealer can be applied around all exposed edges of film to help prevent the film from lifting due to environmental exposure or cleaning.
Specifications
Colour Clear
Composition Acrylic solution in xylene
Application Temperature Range 10º to 38ºC (50º to 100ºF)
Minimum Viscosity 700 Centipoise
Percent Solids 38+/- 2%
Service Temperature Range -51º to +65ºC (-60º to +150ºF)
Chemical Resistance Resists mild acids, mild alkalis, and salts.
Excellent water resistance.
Hydraulic fluid, LD-4, will dissolve 4150S within one hour of exposure.
Shelf Life and Storage
Store edge sealer in a cool, dry place and use within one year from the date of purchase.
Tightly cap the container after each use.
How To Apply Edge Sealer
- Do not apply edge sealer unless the temperature is above the minimum recommended temperature.
- Remove the application tape and re-squeegee the edges before applying the edge sealer.
- Use the felt dauber supplied with edge sealer or a ¼ inch (0.6cm) brush.
- Wipe any excess sealer off the dauber or brush.
- Hold the brush or the flat edge of the dauber so that it straddles the film and substrate.
- Pull the dauber or brush along the edge in a smooth continuous motion. Make sure the entire edge is covered with no gaps
Scotchcal Edge Sealer- 4150S 237mL
Product Description
3M Edge Sealer can be applied around all exposed edges of film to help prevent the film from lifting due to environmental exposure or cleaning.
Specifications
Colour Clear
Composition Acrylic solution in xylene
Application Temperature Range 10º to 38ºC (50º to 100ºF)
Minimum Viscosity 700 Centipoise
Percent Solids 38+/- 2%
Service Temperature Range -51º to +65ºC (-60º to +150ºF)
Chemical Resistance Resists mild acids, mild alkalis, and salts.
Excellent water resistance.
Hydraulic fluid, LD-4, will dissolve 4150S within one hour of exposure.
Shelf Life and Storage
Store edge sealer in a cool, dry place and use within one year from the date of purchase.
Tightly cap the container after each use.
How To Apply Edge Sealer
- Do not apply edge sealer unless the temperature is above the minimum recommended temperature.
- Remove the application tape and re-squeegee the edges before applying the edge sealer.
- Use the felt dauber supplied with edge sealer or a ¼ inch (0.6cm) brush.
- Wipe any excess sealer off the dauber or brush.
- Hold the brush or the flat edge of the dauber so that it straddles the film and substrate.
- Pull the dauber or brush along the edge in a smooth continuous motion. Make sure the entire edge is covered with no gaps